Home
/
Viking Error Codes
Viking Appliance Error Codes
Viking Range & Stove Error Codes
- F01 – Temperature Sensor Error: Oven or burner sensor reporting inaccurate readings.
- F02 – Overheat Protection Triggered: Excessive heat caused safety shutdown.
- F05 – Ignition Failure: Burner failed to ignite after multiple attempts.
- F12 – Control Panel Error: Keypad not responding or shorted.
- F20 – Power Supply Issue: Voltage abnormality preventing operation.
- F30 – Communication Error: Modules not communicating internally.
Viking Oven Error Codes
- F01 – Temperature Sensor Failure: Oven temperature cannot be regulated accurately.
- F03 – Heating Element Fault: Element not heating or partially damaged.
- F05 – Ignition / Gas Valve Error: Gas flow or ignition failure.
- F12 – Touch Panel Malfunction: Controls are unresponsive.
- F22 – Overtemperature Condition: Oven exceeded safe heat levels.
- F30 – Communication Fault: Electronic boards cannot synchronize.
Viking Cooktop & Rangetop Error Codes
- F01 – Surface Sensor Fault: Cooktop temperature readings inaccurate.
- F02 – Overheat Shutdown: Cooktop too hot, system disabled heating.
- F05 – Ignition Failure: Burner not lighting properly.
- F10 – Power Error: Voltage or wiring issue.
- F20 – Communication Failure: Control system not responding.
- F41 – Touch Control Error: Touch panel malfunctioning.
Viking Vent Hood Error Codes
- F2 – Fan Error: Motor unable to maintain correct speed.
- F4 – Temperature Sensor Fault: Hood temperature readings incorrect.
- F5 – Lighting Circuit Issue: Integrated lights malfunction.
- F7 – Control Panel Error: Buttons or touch controls failing.
- F10 – Power Error: Voltage irregularity detected.
- F20 – Filter Detection Error: Hood unable to detect installed filters.
Viking Refrigerator Error Codes
- EC1 – Freezer Sensor Fault: Sensor readings inaccurate, affecting freezer temperature.
- EC2 – Refrigerator Sensor Failure: Fresh food temperature incorrect.
- EC4 – Evaporator Fan Error: Fan not circulating air properly.
- EC5 – Control Board Malfunction: Electronics failing to regulate cooling.
- EC7 – Defrost System Fault: Defrost cycle unable to complete.
- EC9 – Voltage Irregularity: Unsafe voltage detected.
Viking Dishwasher Error Codes
- E01 – Leak Detected: Water in base tray activating safety shutdown.
- E02 – Inlet Water Error: Insufficient water flow.
- E03 – Drainage Problem: Water failing to drain.
- E05 – Heating Fault: Water not heating properly.
- E06 – Turbidity Sensor Malfunction: Soil sensor not reading correctly.
- E09 – Circulation Pump Failure: Motor not generating proper spray pressure.