Bosch Dishwasher Repair & Service in New York

This is usually caused by trapped food particles and grease inside the filter or drain hose. We recommend removing and cleaning the mesh filter at the bottom of the tub and cleaning with a dishwasher cleaner or a natural cleaning agent.. If the smell persists, the drain hose might lack a "high loop," allowing dirty sink water to back up into the machine.

Bosch dishwashers rely on condensation drying rather than an exposed heating element. Ensure you are using a liquid rinse aid, which helps water sheet off the dishes. Keep in mind that plastics naturally retain moisture. If nothing is drying and the dishes feel cold right after a cycle, the heating pump might be damaged.

This is usually caused by tall items (like large plates or cutting boards) blocking the detergent dispenser door from popping open. It can also happen if the spray arm nozzles are clogged with mineral deposits, preventing water from reaching the tablet. Clearing the spray arms with a toothpick usually helps.

Yes, if the rubber door gasket is torn, permanently warped, or heavily caked with grease, it will allow water to escape during the high-pressure wash cycle. Sometimes, thoroughly cleaning the seal with a damp cloth fixes minor leaks caused by debris. If the rubber is physically damaged, we can replace the gasket to ensure a watertight fit.

This "infinite loop" often happens when the machine struggles to heat the water to the required temperature. If the heating element inside the circulation pump is burnt out, the machine endlessly waits for the water to get hot, stalling the timer. This requires a diagnostic to check the heat pump and the NTC temperature sensor.