Thermador Coffee Machine repair and service in New York

Often, it is a safety interlock issue, not a router problem. For Remote Start to work, the machine must verify that milk has been placed inside and the door hasn't been opened since. If the door micro-switch is glitchy, the machine disables remote brewing for safety. We check the door latch sensors and the communication module.

Thermador uses high-quality Ceramic Discs for grinding, which are quieter than steel but brittle. A loud screech usually means a foreign object (like a stone from the bean bag) has shattered a ceramic disc. We can replace the grinder assembly to return the machine to its whisper-quiet operation.

While some water in the tray is normal from the rinse cycle, a full tray after just one cup indicates a leak in the Ceramic Valve or the docking station of the brew unit. These internal distribution valves direct water between the steam and brew loops. We replace the faulty valve components to stop internal leakage.

Not necessarily. This is often caused by dried milk residue clogging the tiny air intake venturi or a failed air suction valve. Even a microscopic blockage disrupts the air-to-milk ratio. We disassemble and chemically clean the frothing system, replacing the air valve if needed, to restore that thick, barista-quality foam.

Thermador machines use optical sensors to detect beans. If you use dark, oily roasted beans, the oils can coat the sensor lens or cause the beans to stick to the hopper walls, not falling into the grinder. We clean the optical sensors and can adjust the grinder incline settings to handle oily beans better.