Whirlpool Dryer Repair & Service in New York

In electric models, this is frequently caused by a burned-out heating element or a blown thermal fuse. In gas models, it's typically faulty gas valve coils or a bad igniter. We test the internal heating circuit with a multimeter to pinpoint and replace the blown component safely.

The "AF" code stands for Air Flow restriction. This means your in-wall exhaust duct or internal lint filter is heavily clogged. The dryer's safety sensors are cutting the heat off early to prevent a fire hazard. We check the internal blower wheel and sensors to ensure the machine is functioning properly before you have your ducts cleaned.

Yes. Whirlpool dryers often develop loud squeaking or thumping sounds when the drum support rollers, idler pulley, or drive belt start to wear out from friction and heat. Continuing to run it can cause the belt to snap. We replace these moving parts using an OEM maintenance kit to restore quiet operation.

A single clicking sound usually means the start switch works, but a safety mechanism is preventing the motor from starting. This is frequently a blown thermal fuse (which acts as a safety kill-switch) or a broken drive belt. If the belt breaks on a Whirlpool dryer, a dedicated switch completely cuts power to the motor.

A hum indicates the drive motor is receiving power but is physically jammed or lacks the torque to start. This can happen if the drum is locked by a completely seized support roller, a jammed blower wheel, or if the motor itself has a bad start winding. We manually inspect the drum assembly and test the motor to solve the issue.